This technical article describes CNCGLASS EVA laminating film in the colorless transparent grade with a 380 nm ultraviolet cut-off, an ethylene–vinyl acetate interlayer made for laminated safety glass and for decorative laminates that need a clear, UV-managed bond line. In the roll the sheet is colorless and translucent; after a proper laminating cycle it becomes colorless and transparent, and a cross-linked network forms inside the interlayer. Typical figures in the article are indications that depend on the laminating process; they do not by themselves constitute a listing, an approval, or a warranty for a particular glass makeup. The useful laminating window is 105 °C to 160 °C, by vacuum lamination or by a pre-bond step followed by an autoclave. Thickness is offered from 0.2 mm to 1.14 mm and width from 800 mm to 2,400 mm, wound on a 76 mm cardboard core. Typical material figures include a density of 0.95 to 0.97 g/cm³ (ISO 1183), tensile strength typically greater than 20 N/mm² after cross-linking (ISO 527-3), a refractive index of 1.48, light transmission of the laminated glass typically greater than 85 % over 400 to 750 nm, and an ultraviolet cut-off of 380 nm, which distinguishes this grade from the colorless transparent film with a 365 nm cut-off. Store below 30 °C and below 80 % relative humidity, and use within twelve months of delivery. The performance methods discussed in the article are commonly applied evaluations; they are not presented as a listing or an approval held by CNCGLASS.