These photographs show thermal cutters used for trimming laminated glass edges. One view shows an orange handheld cutter on a table, labelled “CE AC 230V/50Hz,” “Thermal Cutter CNC02,” and cnc@cncglass.com, with foam on the cutting head, four spare blades in bags, a coiled power cord with an EU-style plug, a hanging hook, and a red cable tie. A further photograph shows a blue handheld cutter on a table, labelled “cnc THERMAL CUTTER” and CNC@CNCGLASS.COM, with an exposed metal blade holder, four blades in bags, a coiled power cord with an EU-style plug, a hanging hook, and a red cable tie. Other views show an orange cutter packed in a black carrying case, labelled “Air-cooling Thermal Cutter” and cnc@cncglass.com, with a brass brush in a recess in the lid, and a close-up of a black switch or wheel on the handle with a partial blue label reading “Air-cooling Thermal Cutter.”
Related existing CNCGLASS pages describe these tools. The CNCGLASS-Thermal-Cutter-CNC02-Kit page identifies the orange handle labelled “Air-cooling Thermal Cutter” and cnc@cncglass.com as the CNCGLASS Thermal Cutter CNC02, designed for continuous working with an air-cooling system, and used to trim overflowed EVA, PVB, or SGP interlayer remains from the edges of laminated glass. That tool heats up in seconds and is controlled with a 16-click temperature knob. The CNC02 operating instruction rates the cutter at a maximum of 100 W, with a body length of 290 mm and a weight of 450 g. It is supplied for 230 V or 120 V, depending on the plug purchased, and the maximum temperature given in that instruction is 400 °C. The same instruction lists a basic kit of one handle, one wire brush, one special spanner, and one tool box, with blades supplied in the quantity purchased separately, and allows only blade types 3.2, 4.2, 11.2, and 14.2. Related catalog pages describe a blue CNC01 model for intermittent operation, with blade types 3.1, 4.1, 11.1, and 14.1, and state that those blades are not interchangeable with the CNC02 types. Plug options listed on those pages are a CE-standard AC 230 V / 50 Hz plug or a US-standard AC 120 V / 60 Hz plug. Those catalog figures are published grade data only and are not measurements of the cutters, blades, or case in these photographs. The blade type numbers are not marked on the bags in these photographs. The catalog and instruction pages used here do not list prices. Enquiries can be sent to cnc@cncglass.com.



