These photographs show a CNCGLASS silicone membrane used for safety-glazing vacuuming. A corner of the sheet is folded back so the smooth, flexible face is easy to see. The membrane is laid on clear protective film.

Existing CNCGLASS product pages describe these silicone membranes as used for glass-lamination vacuuming with EVA, PVB, SGP, or TPU. The product catalog lists the thin silicone membrane grade as both sides smooth, with size options of 1 mm or 2 mm thickness, 2.95 m width, and length to order; hardness 40±5 Shore A; tensile strength ≥9.5 MPa; tear strength ≥37 N/mm; elongation 750%; long-run temperature 220°C; strong EVA resistance; and a service life of more than 3,000 cycles. Those catalog figures are for that published grade and are not measurements of the sheet in these photographs. Enquiries can be sent to cnc@cncglass.com.

CNCGLASS-Silicone-Membrane-Corner-Folded-Back
CNCGLASS silicone membrane with a corner folded back, showing a smooth, flexible face; the sheet is laid on clear protective film.
CNCGLASS-Silicone-Membrane-Folded-To-Show-Smooth-Faces
The same silicone membrane, folded to show both smooth faces and the cut edge of the sheet.
CNCGLASS-Silicone-Membrane-Laid-On-Protective-Film
CNCGLASS silicone membrane laid out on protective film, with the corner turned back along the length of the sheet.

The last photograph is a wider view, with a plastic-wrapped roll of the sheet at the top of the frame.

CNCGLASS-Silicone-Membrane-With-Rolled-Sheet
A wider view of the CNCGLASS silicone membrane, with a plastic-wrapped roll of the sheet at the top of the frame.

Published by Peter Lin CNC Glass Interlayer www.cncglass.com www.c-n-c.com Mail: cnc@cncglass.com benext77@hotmail.com

to order, please contact email: cnc@cncglass.com

Leave a comment

Your email address will not be published. Required fields are marked *